How Did a Vande Bharat Train Run 463 Km With No Working Brakes?

On October 24, 2026, an empty Vande Bharat train set off from Hatia in Jharkhand, bound for Jhansi in Uttar Pradesh, 463 kilometres away. The crew had already reported that the brakes barely worked. The train went anyway. It covered the whole distance with the braking systems of every single coach isolated — effectively switched off — relying only on the freight locomotive hauling it and on regenerative braking to stop. It arrived at Deen Dayal Upadhyaya station in Uttar Pradesh, where an inspection finally revealed what the crew had ben warning about all along. Now South Eastern Railway has ordered a full investigation, and its preliminary findings point to a chain of negligence that should worry anyone who rides India's railways.

Vande Bharat train on railway tracks in India, faulty brakes investigation — Global Insight

According to reports from the New Indian Express and the Telegraph India, citing an official order from South Eastern Railway, the empty chair car rake was being moved with the help of a freight locomotive, and the Vande Bharat's braking system was supposed to be integrated with the locomotive's so the two worked as one. That integration never happened. After departure from Hatia, during a brake test in the Hatia–Ranchi section, the loco pilot found that "the brake power of the train was very poor and ineffective". The warning was given. The train kept going.

How a train runs 463 kilometres without brakes

To understand how this was possible, it helps to know how a train like this is supposed to stop. A Vande Bharat rake is a set of coaches whose brakes are designed to work together, controlled from the locomotive. When the coaches are being hauled by a freight locomotive instead of their own power car, the two braking systems must be linked — otherwise the coaches are just dead weight being dragged along, with no way to slow themselves down. What the inspection at Deen Dayal Upadhyaya found was that the braking systems of all the coaches had been isolated, which means they were disconnected and could not apply at all.

That left the train with only two ways to slow down: the freight locomotive's own brakes, and regenerative braking, which uses the traction motors to slow the train and feed energy back. Both work, after a fashion, on a light empty rake on flat track. Neither is a substitute for the full braking system of a 16-coach train, and neither would have been enough if something had gone wrong — a signal passed at danger, an obstacle on the line, a passenger train crossing ahead. The railway zone itself described operating a train without adequate braking power as a major safety concern, warning that it could endanger railway employees and other train operations. The 463-kilometre journey, the order stated, was completed relying exclusively on those two systems, without the coaches' brakes being applied once.

Who the preliminary probe blames

South Eastern Railway issued its formal investigation order on November 7, directing the Divisional Railway Manager of Ranchi to probe the incident, establish individual responsibility and recommend corrective measures. The preliminary findings, reported by multiple outlets, identify negligence at several levels: the coach and wagon staff responsible for maintaining the train, who failed to physically check whether the brakes were functioning before allowing the empty rake to depart; the section and traction controllers at the stations concerned; and the train crew who operated the rake from Hatia to Deen Dayal Upadhyaya. Two loco pilots reported poor braking, according to the Telegraph's account, and the warnings were ignored at more than one point along the route.

The incident did not happen in isolation. It took place on October 24, days before the Kolkata–Sairang Express derailed in Assam on November 11 — a crash we covered in our report on the derailment, in which a preliminary probe pointed to a brake valve left closed. Two brake-related failures, eighteen days apart, on the same railway network, with the same pattern: a warning sign spotted, a warning sign ignored, and a train allowed to keep moving. The Vande Bharat case ended without injuries only because the rake was empty. The Sairang derailment was the reminder of what happens when the luck runs out.

What the probe has to answer

The Ranchi investigation has three real questions to answer. First, why was the rake allowed to depart Hatia at all after the brake test showed the brakes were ineffective — who had the authority to stop it, and why did nobody use it? Second, why did the warnings from two loco pilots not stop the train at any of the stations along the way — was there no procedure for it, or did the procedure exist and get ignored? Third, how did an entire rake leave a maintenance depot with every coach's brakes isolated — was the isolation a maintenance error, a handover failure, or a deliberate shortcut taken to keep the movement on schedule?

The answers matter beyond this one incident, because the Vande Bharat is the public face of Indian Railways' modernisation — the train the government points to when it talks about speed, comfort and a railway for the future. A flagship train running 463 kilometres without working brakes is not a footnote; it is a test of whether the safety culture behind the flagship has kept up with the marketing. India's transport systems have had a brutal month for safety questions — in America, the FAA ordered a rare nationwide ground stop after a communications failure, and the lesson there was the same: complex systems fail when the warnings inside them are not acted on. The Vande Bharat probe will show whether Indian Railways has learned that lesson, or whether the next warning will be ignored the same way.

 

Post a Comment

Previous Post Next Post